Coltene CanalPro Bioceramic Root Canal Sealer 3 g
A premixed calcium silicate-based bioceramic root canal sealer designed for moisture-activated obturation with gutta-percha.
A root canal sealer is used with gutta-percha to occupy irregularities between the prepared canal wall and the core filling material as part of the complete obturation system. Coltene CanalPro Bioceramic Root Canal Sealer is a ready-to-use, premixed calcium silicate-based sealer developed for professional endodontic obturation procedures.
The material is hydrophilic and utilizes moisture present within the prepared root canal to initiate a hydraulic setting reaction. This eliminates chairside powder-and-liquid mixing and provides a consistent premixed paste for direct dispensing. The exact moisture requirements, application technique, and setting conditions should always follow the current manufacturer's Instructions for Use (IFU).
During setting, the calcium silicate chemistry develops an alkaline environment and releases calcium ions. These characteristics are associated with the biological response of calcium silicate materials and are intended to support mineral deposition. However, they should not be interpreted as guarantees of complete canal disinfection, hard tissue formation, or prevention of reinfection.
The sealer is radiopaque, allowing postoperative radiographic assessment of the completed obturation. Its premixed consistency is designed to support adaptation around gutta-percha within the prepared root canal system. As with all endodontic sealers, it is intended to be used as part of a complete obturation system rather than as a standalone filling material.
Available product information indicates compatibility with gutta-percha, including single-cone obturation techniques where supported by the manufacturer. The single-cone technique remains a gutta-percha-based obturation method; the sealer is not intended to function as a standalone core filling material unless specifically indicated by the manufacturer.
Successful endodontic treatment depends on accurate working-length determination, effective chemomechanical preparation, irrigation, moisture control, appropriate sealer placement, proper gutta-percha adaptation, an adequate coronal seal, and appropriate postoperative follow-up.
- Calcium silicate-based bioceramic root canal sealer
- Ready-to-use premixed paste formulation
- Moisture-activated hydraulic setting mechanism
- Hydrophilic formulation for use within prepared root canals
- Calcium ion release associated with calcium silicate chemistry
- Develops an alkaline environment during setting
- Radiopaque for postoperative radiographic evaluation
- Designed for use with gutta-percha obturation
- Suitable for single-cone obturation where supported by the current manufacturer IFU
- Eliminates chairside powder-and-liquid mixing
- Designed to support adaptation around gutta-percha within the prepared root canal system
- Supplied in a 3 g presentation
- Intended for professional endodontic use
Contents
- 1 × Coltene CanalPro Bioceramic Root Canal Sealer (3 g)
| Specification | Details |
|---|---|
| Brand | Coltene |
| Product Name | CanalPro Bioceramic Root Canal Sealer |
| Product Type | Bioceramic Root Canal Sealer |
| Chemistry | Calcium Silicate-Based Bioceramic |
| Form | Ready-to-Use Premixed Paste |
| Setting Mechanism | Moisture-Activated Hydraulic Set |
| Hydrophilicity | Hydrophilic |
| pH | Reported as High in Supplied Product Information* |
| Calcium Ion Release | Reported in Supplied Product Information* |
| Radiopacity | Reported as Radiopaque |
| Pack Size | 3 g |
| Core Material | Gutta-Percha |
| Obturation Technique | Single-Cone and Other Manufacturer-Supported Gutta-Percha Techniques |
| Department | Endodontics |
| Category | Root Canal Sealers |
| Professional Use | Yes |
| Manufacturer | Coltene |
- Prepare the root canal using standard endodontic instrumentation and irrigation protocols.
- Manage canal moisture according to the current manufacturer IFU.
- Verify the fit of the selected gutta-percha cone at the established working length.
- Prepare the premixed sealer according to the manufacturer's dispensing instructions.
- Place the sealer and gutta-percha using the manufacturer-approved obturation technique.
- Avoid excessive sealer volume and unnecessary apical pressure during placement.
- Remove excess gutta-percha and sealer coronally as required.
- Verify the completed obturation clinically and radiographically.
- Complete the definitive coronal restoration according to the planned restorative protocol.
For professional dental use only. Always follow the latest manufacturer Instructions for Use for dispensing, moisture requirements, setting conditions, and obturation techniques.
Clinical Considerations
- Use with a compatible gutta-percha core material.
- Avoid excessive sealer placement.
- Avoid intentional extrusion beyond the apical foramen.
- Accurate working-length determination remains essential.
- The alkaline environment does not replace proper canal cleaning and irrigation.
- Calcium ion release should not be interpreted as guaranteeing hard tissue formation.
- The material should not be described as producing a guaranteed hermetic or completely impermeable seal.
- Confirm compatibility before using warm vertical compaction or other thermoplastic obturation techniques.
- Maintain the canal moisture conditions recommended by the manufacturer.
- Excessively dry or excessively wet canals may affect material performance.
- Postoperative radiographs should be used to evaluate obturation quality.
- A sound coronal restoration remains essential for long-term treatment success.
- Refer to the current manufacturer IFU for retreatment recommendations.
Cleaning and Material Handling
- Prevent contamination of the dispensing outlet during use.
- Use a new single-use dispensing tip for each patient whenever disposable tips are supplied.
- Do not reuse or reprocess disposable components.
- Do not return dispensed material to the original container.
- Keep the dispensing outlet clean and free of set material.
- Clean reusable instruments before the material sets.
- Dispose of contaminated materials according to local biomedical waste regulations.
Storage and Handling
- Store in the original packaging.
- Keep the container tightly sealed after use.
- Protect from moisture before dispensing.
- Store away from excessive heat and direct sunlight.
- Do not use after the expiry date.
- Record the batch number where traceability is required.
- Follow the storage conditions specified in the current manufacturer IFU.
Manufacturer
Manufacturer: Coltene
| Brand | Coltene Whaledent |
|---|
To facilitate accurate invoicing and maintain tax compliance, we kindly request that you provide your GST number.
Why is this necessary?
The GST number enables us to issue precise invoices for your order, ensuring adherence to tax regulations.
Please fill out your Registration Number / ID
To proceed with your order, kindly enter your Medical Registration number or Medical ID.
Change Pincode
- Buy 2 for ₹2,350.00 each and save 1%
- Buy 5 for ₹2,300.00 each and save 3%
Available Offers
| Offer | Add on Savings |
|---|---|
| Buy 2 for ₹ 2,350.00 each | 1.26% |
| Buy 5 for ₹ 2,300.00 each | 3.36% |
Want to buy even more quantity?
Get Bulk Quote Now
100% Genuine Products
Easy Returns
On Time Delivery
Secure Checkout
