GC Fuji 9 Gold Label 9 Posterior Restorative GIC
High-viscosity, fast-setting glass ionomer restorative cement offering strong fluoride release, excellent wear resistance, and reliable bulk-fill performance for posterior restorations.
· Chemical Bonding to Tooth Structure
· No Etching or Bonding Required
· High Compressive and Flexural Strength
· Enhanced Longevity and Wear Resistance
· Excellent Handling Properties
· Bulk Fill, Single-Step Placement
· Radiopaque Formula
Gc Gold Label 9 Extra - Big Pkg:
- 1 x 15 g Powder
- 1 x 8 g Liquid(6.4ml)
Gc Gold Label 9 - Big Pkg:
- 1 x 15 g Powder
- 1 x 13.1 g (10.5mL)Liquid
Gc Gold Label 9 Extra - Mini Pack:
- 1 x 5g Powder
- 1 x 3g Liquid(2.4ml)
Gc Gold Label 9 - Mini Pack:
- 1 x 5 g Powder
- 1 x 5 g Liquid(4ml)
|
Parameter |
Meaning |
|
Powder / Liquid Ratio (g/g): 0.40 / 0.12 |
This is the recommended mixing ratio by weight — 0.40 grams of powder to 0.12 grams of liquid. Following this ratio ensures optimal handling and mechanical properties. |
|
Mixing Time: 10 seconds |
The time you should take to mix the powder and liquid on a mixing pad. Efficient mixing within this time ensures a smooth and homogenous consistency. |
|
Working Time: 1 minute 15 seconds |
The maximum time available from the start of mixing to place and contour the material before it begins setting. |
|
Net Setting Time: 2 minutes |
The total time from the start of mixing after which the material sets hard enough to resist gentle pressure (not yet ready for finishing). |
|
Final Finishing Commencing Time: 2 minutes 30 seconds |
The time after mixing when you can begin final contouring, shaping, or polishing of the restoration — typically when the material is fully set and stable enough to handle finishing instruments. |
· GC FUJI 9
|
Parameter |
Details & Meaning |
|
Mixing Time: 30 seconds |
The total time recommended to thoroughly mix the powder and liquid using a spatula. A consistent, homogenous mix ensures good handling and strength. |
|
Working Time: 2 minutes |
The time window (from the start of mixing) within which the material must be placed and adapted into the cavity. After this, the material begins to set. |
|
Finishing Begins: 6 minutes |
Final finishing, shaping, and polishing of the restoration should start 6 minutes after mixing begins. This allows sufficient time for the material to fully harden. |
|
Powder / Liquid Ratio: 3.6g / 1.0g |
The ideal weight ratio for optimal physical properties. Using this ratio ensures appropriate consistency, strength, and setting behavior. |
Ø Tooth Preparation
- Clean the cavity thoroughly.
- Remove caries with minimal tooth structure removal.
- Isolate the area and avoid contamination with saliva or blood.
Ø Surface Conditioning (Optional but Recommended)
- Apply GC Cavity Conditioner (20% polyacrylic acid) to the cavity for 10 seconds.
- Rinse and gently dry—do not desiccate.
Ø Dispensing Powder and Liquid
- Dispense 1 level scoop of powder and 1 drop of liquid onto a mixing pad.
- Use the correct powder-to-liquid ratio as per instructions (typically 3.6g powder : 1g liquid).
Ø Mixing
- Mix thoroughly using a plastic spatula for 20–25 seconds until a smooth, glossy consistency is achieved.
- Avoid incorporating air bubbles.
Ø Placement
- Quickly apply the mix into the cavity using a suitable instrument.
- Adapt well to cavity walls and avoid overfilling.
Ø Shaping
- Shape and contour immediately after placement.
- Maintain moisture control and avoid drying out.
Ø Initial Setting
- Allow the material to set for approximately 2.5 minutes after start of mix.
- Avoid contact with moisture during setting.
Ø Final Finishing
- Begin finishing procedures (carving, trimming) after 6 minutes from start of mixing.
- Polish if desired for a smoother surface.
Ø Optional Varnish Application
- Apply GC Fuji Varnish or light-cured resin coating to protect against moisture and enhance longevity.
| Brand | GC |
|---|
To facilitate accurate invoicing and maintain tax compliance, we kindly request that you provide your GST number.
Why is this necessary?
The GST number enables us to issue precise invoices for your order, ensuring adherence to tax regulations.
Please fill out your Registration Number / ID
To proceed with your order, kindly enter your Medical Registration number or Medical ID.
Variant Price
| Variant | Price |
|---|---|
| Big Pack | ₹2,624.00 |
| Mini Pack | ₹1,379.00 |
| Big Pack - (Extra) | ₹2,812.00 |
| Mini Pack - (Extra) | ₹1,379.00 |
Want to buy even more quantity?
Get Bulk Quote Now
100% Genuine Products
Easy Returns
On Time Delivery
Secure Checkout
Help!