·        Hybrid Composition

·        Sustained Fluoride Release

·        Excellent Bonding

·        Smooth Handling

·        Moisture Tolerant

·        High Radiopacity

·        Multiple Shades Available

• 1 x 15gm powder
• 1 x 6.4ml liquid

• Powder/Liquid Ratio (g/g): 3.0 / 1.0
• Mixing Time: 25–30 seconds
• Working Time (23°C / 73°F): 1 minute 45 seconds
• Net Setting Time (37°C / 99°F): 2 minutes 40 seconds
• Finishing Time (from start of mixing at 37°C / 99°F): 6 minutes

1.     Cavity Preparation:

o    Clean the cavity thoroughly.

o    Avoid over-drying; maintain slight moisture on the dentin surface.

2.     Dispensing:

o    Measure powder and liquid using the provided scoop and dropper in a 3.0:1.0 (g/g) ratio.

3.     Mixing:

o    Mix the powder and liquid on a mixing pad for 25–30 seconds until a smooth, homogenous consistency is achieved.

4.     Placement:

o    Apply the mixed material directly into the cavity using a suitable instrument.

o    Shape and contour as required during the working time of 1 minute 45 seconds at 23°C (73°F).

5.     Setting:

o    Allow the material to set naturally.

o    Net setting time is approximately 2 minutes 40 seconds at 37°C (99°F).

6.     Finishing and Polishing:

o    Final contouring and polishing may begin after 6 minutes from the start of mixing (at 37°C/99°F).

o    Use standard finishing instruments for best results.

7.     Post-Operative Care:

o    Advise the patient to avoid chewing on the restoration for at least one hour to allow full maturation.