Prevest Fusion Core DC Flo

• Dual-Cure Formula for Deep Polymerization

• Thixotropic Consistency – Flows When Needed

• High Bond Strength to Dentin and Posts

• Radiopaque for Postoperative Visibility

• Excellent Adaptation with Minimal Voids

• Ideal for Core Build-Up and Post Cementation

• 1 x 9g Dual Syringe

• Mixing Tips

• Instruction Manual

Technical Data

• Working Time: Approximately 60 seconds

• Setting Time: 3 to 4 minutes

• Compressive Strength: 140–150 MPa

• Flexural Strength: 60–70 MPa

• Film Thickness: 50 µm

Composition

• Base Paste: Contains Bisphenol A glycidyl methacrylate, Ethoxylated Bisphenol A dimethacrylate, Triethylene glycol dimethacrylate, Silanated barium glass powder, Amorphous fumed silica, along with curing agents and stabilizers

• Catalyst Paste: Contains Bisphenol A glycidyl methacrylate, Ethoxylated Bisphenol A dimethacrylate, Triethylene glycol dimethacrylate, Silanated barium glass powder, Amorphous fumed silica, along with curing agents and stabilizers

Cautions

• Do not use with materials containing zinc oxide or eugenol.

Storage Instructions

• Keep in a cool, dry place between 10°C and 24°C.

• Always close the cap securely after use.

• Protect from moisture.

• Shelf life is maintained after opening if stored properly.

Shelf Life

• 2 years from the manufacturing date.

1. Prepare the tooth structure and ensure the area is clean and dry.

2. Apply an appropriate adhesive system as per protocol.

3. Dispense Fusion Core DC Flo directly into the cavity or onto the post using the provided automix tip.

4. If required, light cure for a few seconds to initiate setting.

5. Allow material to chemically cure completely before tooth preparation.

6. Shape and finish the core using standard rotary instruments.