Ivoclar Te-Econom Plus Universal Hybrid Composite – 4 g
A sculptable, light-cured and radiopaque universal hybrid composite for direct Class I–V anterior and posterior restorations.
Ivoclar Te-Econom Plus is a light-cured, radiopaque universal hybrid composite for direct restorations in anterior and posterior teeth. Its sculptable consistency supports controlled placement, adaptation, and anatomical contouring before polymerisation.
Its working characteristics provide adequate time for shaping occlusal anatomy, proximal contours, and anterior morphology before light curing. Ivoclar classifies Te-Econom Plus as a light-cured, radiopaque hybrid composite for Class I–V restorations.
The radiopaque formulation supports differentiation of the restorative material from surrounding tooth structure during postoperative radiographic assessment. Its finishing and polishing characteristics make it suitable for selected functional posterior and aesthetic anterior restorations.
Te-Econom Plus is not self-adhesive. It must be placed over appropriately conditioned and bonded enamel and dentin and does not replace an etchant, bonding agent, liner, or flowable composite where these materials are clinically indicated.
Te-Econom Plus is a conventional incremental composite rather than a bulk-fill material. Each increment must be separately adapted and polymerised according to the current Ivoclar instructions, considering the selected shade, increment thickness, curing-light output, wavelength, and curing distance.
Indications
- Direct Class I restorations
- Direct Class II restorations
- Direct Class III restorations
- Direct Class IV restorations
- Direct Class V restorations
- Aesthetic anterior restorations
- Posterior restorations where a conventional light-cured hybrid composite is indicated
- Light-cured universal hybrid composite
- Suitable for direct anterior and posterior restorations
- Indicated for Class I–V cavities
- Sculptable consistency for anatomical contouring
- Extended working time before light activation
- Radiopaque for postoperative radiographic assessment
- Good finishing and polishing characteristics
- Suitable for incremental placement
- Compatible with appropriate enamel and dentin adhesive systems
- Supplied in a convenient 4 g syringe
- Available in four selectable shades
- Designed for professional restorative dentistry
Pack Contents
- 1 × 4 g Te-Econom Plus composite syringe in the selected shade
Available Shades on This Product Page
| Shade | Presentation |
|---|---|
| A1 | 1 × 4 g Syringe |
| A2 | 1 × 4 g Syringe |
| A3 | 1 × 4 g Syringe |
| B2 | 1 × 4 g Syringe |
Select the required shade before adding the product to the cart.
| Attribute | Specification |
|---|---|
| Brand | Ivoclar |
| Product Name | Te-Econom Plus |
| Product Type | Universal Hybrid Composite |
| Restorative Type | Direct Composite Restorative |
| Curing Method | Light Cure |
| Radiopacity | Radiopaque |
| Consistency | Sculptable |
| Clinical Application | Anterior and Posterior Restorations |
| Cavity Classes | Class I–V |
| Placement Technique | Incremental |
| Increment Thickness | Follow the current Ivoclar instructions for the selected shade and curing-light output |
| Available Shades | A1, A2, A3 and B2 |
| Presentation | Syringe |
| Net Quantity | 4 g |
| Intended User | Qualified Dental Professional |
General Composition
The formulation generally contains:
- Dimethacrylate resin matrix
- TEGDMA
- Barium glass fillers
- Ytterbium trifluoride
- Silicon dioxide
- Mixed oxide fillers
- Initiators
- Stabilizers
- Additives and pigments
Refer to the current Ivoclar instructions and safety data sheet for the complete formulation, filler loading, and safety information.
- Select the appropriate Te-Econom Plus shade before isolation, while the tooth remains hydrated.
- Isolate the treatment area adequately, preferably using a rubber dam where clinically appropriate.
- Prepare the cavity according to the requirements of the planned adhesive restoration.
- Clean the preparation and gently dry it without unnecessarily dehydrating the dentin.
- Apply appropriate pulp protection or a liner in deep preparations where clinically indicated.
- Place a matrix and wedge when required for proximal contour and contact formation.
- Condition and bond the enamel and dentin using a compatible adhesive system according to its instructions.
- Place a flowable composite or liner only where clinically indicated.
- Dispense Te-Econom Plus directly from the syringe using a clean restorative instrument.
- Apply the material in controlled increments according to the thickness permitted in the current Ivoclar instructions for the selected shade and curing unit.
- Adapt and contour each increment before curing.
- Polymerise every increment individually according to the selected shade, increment thickness, and curing-light output.
- Keep the curing-light tip as close as practical and correctly oriented towards the composite surface.
- Complete anatomical contouring, finishing, and polishing with suitable restorative instruments.
- Check proximal contacts, margins, and occlusion before completing the procedure.
For professional dental use only.
Clinical Considerations
- Te-Econom Plus is not a self-adhesive restorative material.
- Use an appropriate enamel and dentin adhesive system.
- It is a conventional incremental composite and should not be used as a bulk-fill material.
- Do not exceed the increment thickness permitted by the current Ivoclar instructions.
- Curing time may start from 10 seconds only when the specified curing conditions are met.
- Polymerisation time depends on shade, increment thickness, light intensity, wavelength, and curing distance.
- Inadequate light curing may affect physical properties and restoration performance.
- Avoid contamination with saliva, blood, or moisture after bonding.
- A flowable liner is optional and should be used only where clinically indicated.
- Use pulp-protection materials in deep preparations according to clinical requirements.
- Do not use in patients with known hypersensitivity to methacrylate-based restorative materials or other listed components.
- Avoid direct contact of uncured material with skin, oral soft tissues, and eyes.
- Close the syringe immediately after dispensing.
- Protect the composite from strong operatory and curing light during placement.
- Use before the expiry date printed on the syringe or packaging.
Storage and Handling
- Store according to the temperature range printed on the current Ivoclar packaging.
- Protect the material from excessive heat, direct sunlight, and strong operatory light.
- Replace the syringe cap immediately after dispensing.
- Keep the syringe opening clean and free from contamination.
- Do not use the material after its stated expiry date.
- Do not use material that shows an abnormal consistency or evidence of contamination.
| Brand | Ivoclar Vivadent |
|---|
To facilitate accurate invoicing and maintain tax compliance, we kindly request that you provide your GST number.
Why is this necessary?
The GST number enables us to issue precise invoices for your order, ensuring adherence to tax regulations.
Please fill out your Registration Number / ID
To proceed with your order, kindly enter your Medical Registration number or Medical ID.
Change Pincode
Variant Price
| Variant | Price |
|---|---|
| Shade A1 - Shade B2 | ₹648.00 |
Want to buy even more quantity?
Get Bulk Quote Now
100% Genuine Products
Easy Returns
On Time Delivery
Secure Checkout
